Operation - Mäktig 710035 Owner's Manual

12. Jumpstart power switch – It is a
manual rotary switch. When you
jumpstart a vehicle, you should
turn off the switch and the
vehicle engine and connect the
unit to the vehicle.
can turn
Executing these steps in the
right order
important.
13. 15A replaceable fuse
14. AC charging adapter

Input voltage: 110V AC

Output voltage: 13.5V DC

Input current: 0.5A
Note: it is recommended that you use the AC charging adapter to
charge the battery.

5. OPERATION

The unit should be operated only in locations that meet the following
requirements:
Dry
Cool
Ventilated
Safe
Protected
from battery
gases
Then you
on the switch.
is extremely
Do not allow water or other liquids to drop or splash on the
unit.
Ambient air temperature should be between -10
(14°F and 104°F) – the cooler the better within this range.
Leave at least 2" (5cm) clearance around the Jumpstarter for
air flow. Ensure that the ventilation openings are not
obstructed.
Do not operate the unit in the same compartment as batteries
or in any compartment capable of storing flammable liquids
like gasoline.
Do not operate the unit where it will be exposed to battery
gases. These gases are very corrosive and prolonged
exposure will damage the Jumpstarter
6
and 40