Mäktig 710035 Owner's Manual page 5

1. Battery level button – When pressed, you can see the battery
level according to the battery level indicators.
2. Battery power level indicators
Value of the battery
U<10.5±0.4V
（10.5±0.4V） <U< （12.5±0.4V）
U>12.5±0.4V
Note: It is recommended that you look over the battery power level
after every 30 minutes charging.
3. LED light – High High brightness LED light for emergency use.
4. LED light switch.
5. Connection Status Indicator – When you connect the clamps to
the battery correctly (red clamp to the positive and black clamp
to the negative), the green LED lights up. When the clamps are
not connected correctly, the red LED lights up.
6. Charging jack – you can charge the battery in the unit by
inserting the attached AC charging adapter into this jack.
7. Two-color charging/charged indicator – When the battery is
being charged, this LED indicator lights red, when the battery is
full charged, this LED indicator light turns green.
8. 12V DC socket – It is an input or output easy-access port. You
can insert the cigarette plug into it to charge the internal battery
or power 12V accessories.
Note ： The 12V DC socket contains 15A fuse for over current
protection.
Note ： It is recommended that you use the unit to power 12V
accessories less than 8A.
9. Black battery clip
10. Portable handle
11. Red battery clip
Note: Be sure that the switch is on off position and the clips are
connected in the right way, that is red to positive polarity, and black
to negative polarity.
Display mode
Only red LED indicator lights.
Only yellow LED indicator lights.
Only green LED indicator lights.
5