Monitor Section - Sony MXP-310 Manual

2-3 Output and Monitor Signal Section

2-3-4 MONITOR Section

1 MONITOR LEVEL control
Turn to control the overall level of the monitor output
signals.
2 MONITOR SOURCE select switches
[LINE 1-2, EXT 1-2, RET 1-2, RET 3-4, SEND 1,
SEND 2, SEND 3, SEND 4]
These switches select the signal routed to the inputs of
the MONITOR OUT connectors and PHONE
connector.
Switches select the corresponding signal, as shown in
the table on the right column.
For details, see Section 3-2-1, "Monitor Source Selection"
on page 3-3.
2-16
Chapter 2 Locations and Functions of Parts and Controls
LINE
1-2
EXT
1-2
RET
1-2
RET
3-4
SEND
1
0
SEND
2
SEND
3
SEND
4
PFL
MONITOR SOURCE
If you press
the switch:
LINE 1-2
EXT 1-2
RET 1-2
RET 3-4
SEND 1
SEND 2
SEND 3
SEND 4
3 PFL (PFL enable) switch
To enable the pre-fader listening, keep this switch
depressed and then press the PFL switch on any
channel.
1 MONITOR LEVEL control
MONITOR LEVEL
10
MONITOR
2 MONITOR SOURCE select switches
[LINE 1-2, EXT 1-2, RET 1-2, RET 3-4,
SEND 1, SEND 2, SEND 3, SEND 4]
3 PFL switch
Monitor signals will be fed from:
LINE OUT 1 and 2
EXT IN 1 and 2
RETURN 1 and 2
RETURN 3 and 4
SEND 1
SEND 2
SEND 3
SEND 4