Interior And Exterior Lights; One-Touch Turn Signal; Auto High Beam System - Acura MDX Sport Hybrid 2019 Owner's Manual

Hide thumbs Also See for MDX Sport Hybrid 2019:
Table of Contents

Advertisement

VEHICLE CONTROLS

Interior and Exterior Lights

Operate interior and exterior lights when the vehicle is on or off.
Brightness Control
n
Adjust instrument panel brightness
when the vehicle is on.
To brighten: Press the + button.
To dim: Press the - button.
A beep sounds when the brightness
reaches its minimum or maximum.
Interior Lights
n
Change the interior light settings using the switches on the ceiling.
ON position: Interior lights remain on.
Door-activated position: Interior
lights come on when any of the doors
are opened, the driver's door is
unlocked, or the vehicle is turned off.
OFF position: Interior lights remain
off.
n
Map Lights
Press the front map lights to turn on or off.
Press the second or third row map lights to turn on or off when the front
interior light switch is in the door-activated position.
38 |
n
Exterior Lights
Rotate the switches on the lever to operate the exterior lights. Push the
lever forward to turn on the high beams. Return the lever to its original
position for low beams.
OFF:
All exterior lights are off.
Turn on exterior lights except headlights.
AUTO: Turn on the automatic lighting feature. Headlights turn on or off
depending on ambient brightness when the vehicle is on.
Headlights automatically come on after the wipers are engaged
for a certain time. The headlights come on when you unlock a
door in dark areas with the headlight switch in AUTO.
Turn on all exterior lights including headlights.
*1
Turn fog lights
on or off.
Cargo Area Lights
n
Located on the rear ceiling in front of
the tailgate.
ON position: Cargo lights remain on.
Tailgate activated: The light comes on
when you open the tailgate, and goes
off when closed.
OFF position: Cargo area lights remain
off.

One-Touch Turn Signal

Use this quick and convenient method to
signal a lane change.
Lightly push the turn signal lever up or
down for a three-blink sequence.
For a continuous signal, push the lever up
or down until it locks into place.

Auto High Beam System

Automatically changes the low beam headlights to high beam headlights
when necessary.
VEHICLE CONTROLS
*1 - If equipped
| 39

Advertisement

Table of Contents
loading

Table of Contents