Table of Contents
Advertisement
Chapter 1:
Introduction
The Dual-band Wireless USB Dongle can access two different networks which could act in any WiFi
station or AP combinations. Operating either in the Hz and 5GHz frequency bands, the Dual-band
Wireless USB Dongle effectively increases the available wireless bandwidth and reduces wireless
interference. The Dual-band Wireless USB Dongle also supports WiFi Direct feature that can easily
build a WiFi P2P PAN network.
The Dual-band Wireless USB Dongle supports 802.11e for multimedia applications, 802.11i and
WAPI(Wireless Authentication Privacy Infrastructure) for security, and 802.11n for enhanced MAC
protocol efficiency.
The Dual-band Wireless USB Dongle is the most versatile wireless tool on the market. Just plug it into
your computer's USB port and enjoy incredible high-speed wireless network access.
Features
3T3R Mode with 450Mbps PHY Rate
Complies with 802.11a/n standards
Supports WEP 64/128, WPA, WPA2
Supports USB 2.0 interface
Compatible with Microsoft Windows Vista, XP/WIN7
WiFi Direct supports wireless peer to peer applications
Physical Details
WPS button
LED
To press the physical WPS button on the Wireless USB Dongle once,
then the LED will start to flash. Please make a connection with another
WPS supported device within 2 minutes.
Off – Power off
Solid Green – When associate with the Access Point or Ad-Hoc wireless
workstation the LED will show solid green.
Blinking Green – Indicate the device is transmitting data through the
Access Point or Ad-Hoc wireless workstation. Also when the PBC button
is pressed, the LED will blink to indicate WPS status that the LED will
blink 2 seconds and off 2 seconds.
-
1 -
Advertisement
Table of Contents
