Table of Contents
Advertisement
WPS
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. The STA as an Enrollee or external Registrar supports the
configuration setup using PIN (Personal Identification Number) configuration method or PBC (Push
Button Configuration) method through an internal or external Registrar.
WPS Tab
8-digit numbers. It is required to enter PIN Code into Registrar when using
PIN Code
PIN method. When STA is Enrollee, users can use "Renew" button to
re-generate new PIN Code.
Click the Pin Input Config (PIN) button to select specific AP to process PIN
Pin Input Config
Config.
(PIN)
Push Button Config
Click this button to connect with AP that supported WPS function within two
(PBC)
minutes. Meanwhile, the AP should also click the PBC button simultaneously.
About
This page displays the information of the Wireless USB Adapter Version.
Switch to AP Mode
To access the soft AP mode, please double click the 802.11 a/n Mini Wireless LAN USB2.0 Adapter
WiFi Soft AP to enter the soft AP mode setting.
Soft AP mode
General
SSID
BSSID
Network Address
Association Table
Config
Shows the network name of the AP.
Shows the MAC address of the AP.
Shows the IP address and subnet Mask of the soft AP.
This table shows the connected client here.
Click the Config button to set up the Wireless Network Properties.
Network Name (SSID): User can change the network name of this access
-
8 -
Advertisement
Table of Contents
