Options For Outdoor Unit; Kpw063A4> Air Direction Adjustment Grille - Daikin 2MXS-N Series Engineering Data

Options for Outdoor Unit

4. Options for Outdoor Unit
4.1 <KPW063A4> Air Direction Adjustment Grille
Component parts
Component parts
Name
Illustration
Quantity
Selection of installation site
Install only on an outdoor unit in a location that satisfies the following conditions:
When installing the outdoor unit near the neighbouring house.
Where you wish to change the exhaust airflow direction because the outdoor unit has been installed
facing a road, so that passing people are not exposed to its exhaust air
When changing the airflow direction to prevent exhaust blowing directly onto passersby or garden plants.
Cautions for usage
Be sure to perform the following as installation precautions to ensure correct and safe use of he air
direction adjustment grille.
1. Install the product so that it is situated high enough to allow access to the outdoor unit for
maintenance purposes.
2. When installing the product in a location in which it may be exposed to strong winds, install a rollover
prevention bracket (sold separately) at the same time.
3. Tighten screws securely. Failure to do so may result in vibration.
Verifying the amount of space required for installation
652
Be sure to check that the following parts are included before installation.
1 Air direction adjustment grille
1 pcs.
2 Screw 3 Spacer
4 pcs. 4 pcs.
Caution
Leave at least 3-15/16 inch between the rear of
the outdoor unit and any obstructions(walls, etc.).
EDUS121503A
4 Installation Manual
1 sheet ( this sheet )
Options