Synchronizing Via Infrared - Pharos 565 Series User Manual

3.5 Synchronizing via Infrared

To synchronize using infrared, you have to set up your infrared-enabled PC to receive
an infrared beam.
1. Follow the instructions in ActiveSync or WMDC Help on your PC for setting up your
PC to receive infrared beams.
2. Align the infrared port on the top of the device with the infrared port on your PC.
Make sure they are unobstructed and within close range (no more than 1 meter apart).
3. On the device, tap Start > ActiveSync.
4. Tap Menu > Connect via IR. ActiveSync or WMDC will sync automatically when
the connection is established. If it does not start automatically, tap Sync.
5. Tap Menu > Disconnect to end the connection.
37