Infrared Connections - Pharos 565 Series User Manual

5. Tap the destination device. If the target device does not appear in the list, ensure
that the device is turned on, discoverable, and within close range of the device.
6. Tap OK after the transfer is done.
Setting up the Device as a Bluetooth Modem
When the device is connected to your PC by using Bluetooth, You can connect your
PC to the Internet by using the device's networking capability.
1. Establish a Bluetooth partnership between the device and your PC (refer to the
section "Creating a Bluetooth Partnership" in this chapter) and turn on Bluetooth on
the device and your PC.
2. Tap Start > Internet Sharing.
3. In PC Connection, select Bluetooth PAN.
4. In Network Connection, select the connection that you want to use.
5. Tap Connect on the device.
6. Set up a Bluetooth PAN (Personal Area Network) on your PC.
7. Tap Connect on the device.

6.4 Infrared Connections

An infrared connection enables you to share information wirelessly with other infrared-
enabled devices over a distance of a meter. You can easily share your appointments,
contacts, pictures, and other information with another infrared-enabled device via
infrared.
Set up the Device to Receive Incoming Beams
You have to set up your device to receive beams before receiving or beaming a file.
1. Tap Start > Settings > Connections > Beam.
2. Select Receive incoming beams.
3. Tap OK.
NOTE Once you select Receive incoming beams, the device automatically receives beams until you clear this
checkbox.
61