Maintenance; General; Reference To Chapter Safety Instructions; Service Center - Siemens SIMOTICS A 1FU8 Operating Instructions Manual

Maintenance

9.1

General

Through careful and regular maintenance, inspections, and overhauls you can detect faults
at an early stage and resolve them. This means that you can avoid consequential damage.
Operating conditions and characteristics can vary widely. For this reason, only general
maintenance intervals can be specified here. Maintenance intervals should therefore be
scheduled to suit the local conditions (dirt, starting frequency, load, etc.).
9.2

Reference to chapter Safety instructions

When carrying out any work on the machine, observe the general safety instructions
(Page 13) and the specifications contained in EN 50110-1 regarding safe operation of
electrical equipment.
9.3

Service Center

Note
Service Center
Please contact the Service Center, if you require support with servicing, maintenance or
repair.
9.4

Safety instructions for inspection and maintenance

Rotating and live parts
Electric machines contain live and rotating parts. Fatal or serious injuries and substantial
material damage can occur if maintenance work is performed on the machine when it is not
stopped or not de-energized.
• Perform maintenance work on the machine only when it is stopped. The only operation
• When performing maintenance work, comply with the five safety rules.
1FU8
Operating Instructions, 02/2016, 5 610 70000 02 000
WARNING
permissible while the machine is rotating is regreasing the roller bearings.
9
77