Mercedes-Benz SLC 300 2019 Operator's Manual page 96

Mirrors
94
Immediately change out of clothing which
R
has come into contact with electrolyte.
If an allergic reaction occurs, seek medi-
R
cal attention immediately.
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-
glare mode if the following conditions are met
simultaneously:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking posi-
tion
Using the memory button
You can store the parking position of the front-
passenger-side exterior mirror using memory
button M ?. The reverse gear must not be
engaged during the process.
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock.
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use button = to adjust the exterior mirror
X
to a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
Using reverse gear
You can adjust the exterior mirror on the front-
passenger side to a position that allows you to
see the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
Ensure that the SmartKey is in position 2
X
in the ignition lock.
With the exterior mirror on the front-
X
passenger side activated, use button = to
adjust the exterior mirror. The rear wheel
and the curb should be visible in the exterior
mirror.
Press memory button M ? and one of the
X
arrows on button = within three seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat
X
the steps.