Care Information - GFW Ottawa Dressing Table Stool Set Assembly Instructions Manual

OTTAWA DRESSING TABLE _STOOL SET - ASSEMBLY INSTRUCTIONS
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
INFORMATION
This product is designed to hold 10 Kg spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and
a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on
a clean floor to prevent any accidental scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the floor.
Please stand item close to a wall and use the anti-tilt strap (S) to prevent any accidents.
use power tools to construct this product.
DO NOT
tighten screws until all parts are assembled or as advised in this guide.
DO NOT
over-tighten screws or bolts.
DO NOT
use this product if parts are missing, damaged or worn.
DO NOT
sit or stand on the product.
DO NOT
stand on the Stool
DO NOT

CARE INFORMATION

Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp sponge and warm soapy water.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
FUTURE REFERENCE.
Batch No. 250417
Page 2 of 12