Belkin OmniView F1DW116C User Manual page 36

Belkin user manual omniviewtm kvm switch with cat5 extension f1dw116c, f1dw216c enterprise quad-bus series

Hide thumbs Also See for OmniView F1DW116C:

Table of Contents

USING YOUR SWITCH

To start the update process, you must run the AutoUpdate application by selecting

"AutoUpdate.exe" from the start menu, or a desktop shortcut.

The first screen of the AutoUpdate application will prompt the user to select an

automatic or manual update. You should generally select automatic, unless you have

a specific reason to do otherwise. An automatic update will check the firmware on

the Switch and compare the versions installed against the latest versions available;

if there are newer versions, the application will download the new firmware from the

Internet and transfer it into the Switch. Then the user needs to power-cycle the KVM

Switch(es), to complete the firmware installation. The manual update works similarly,

but the user needs to acquire the correct update file manually.

Note: Before updating the Switch, make sure that AutoScan is off and IntelliView

is not displayed on the console. This will reduce the level of extraneous activity in

the Switch.

34 34

Table of Contents

Omniview f1dw216c