Stop - Volvo D9 Installation Manual

Engine control interface, Stop

Stop

14
There are two different ways to request engine stop:
1. Stop request on CAN
The 'Stop request' signal is sent on CAN in the VP70
message and results in instant engine stop.
This is the standard method to initiate engine stop.
2. External stop interface
For D9 and D16 engines, Normally Open are default:
External stop is triggered by the pins closure.
On D13 this can be set as Normally Open or Normally
Closed using the aftermarket tool (VODIA).
Bus interface
Associated signals:
BB1: Rx: VP70 'Stop request'
47706587 05-2015 © AB VOLVO PENTA