9. SERIES 2 PROJECTOR SETUP
9.3.1 Christie Series 2 Projector 3D Settings
The 3D macros for Christie Series 2 projectors should be configured with the following settings
for '3D Input Control' (see Figure 35):
•
3D Sync Input Mode: Use 'Line Interleave' (first line=Left, second line=Right)
•
L/R Display Reference: Not Used
•
Frame Rate: 6:2
•
L/R Display Sequence: Left (L1R1 L2R2)
HFR UPGRADE MANUAL
FOR SX-2001/SA-2100(A/T) TO SX-000(A/T)R
DIGITAL CINEMA SERVER WITH
INTEGRATED MEDIA BLOCK
Figure 34 Projector input settings for Christie projectors
Figure 35 3D macro settings for Christie projectors
32
May 18, 2016