Ikelite WD-3 Instruction Manual

Wide angle conversion dome

Download this manual

WD-3 Wide Angle Conversion Dome

Product Number 6430.3

I n s t r u c t i o n M a n u a l

Thank you for your purchase of Ikelite equipment. Please read this

instruction manual completely before attempting to operate or dive

with this product. Please refer to the back page of this manual to

Page 1 Product Number 6430.3 I n s t r u c t i o n M a n u a l Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product.
Page 2 Table of Contents Included in the Box ................P. 2 Attach WD-3 to 3-inch Flat Port ............P. 3 Customer Support................P. 4 Limited Warranty ................P. 4 Included in the Box WD-3 Dome Lanyard...
Page 3 Attach WD-3 to 3-inch Flat Port 1. Rotate Thumbscrews counterclockwise so no threads show inside WD-3 Dome. 2. Gently push Dome over front of 3-inch Port. 3. Hand-tighten and snug both Thumbscrews. DO NOT over-tighten. 4. Extended areas of Dome Hood should be at the 12 and 6 o’clock positions to avoid vignetting.
Page 4: Customer Support
This Ikelite product is warranted against any manufacturing defects for a period of one (1) year from the original date of purchase. Defective products should be returned to Ikelite postage paid. Ikelite will, at its sole discretion, repair or replace such products, and will return to customer postage paid.