Ikelite 6154.48 Instruction Manual

Ikelite Digital Housing
i n s t r u c t i o n
#6154.48 for ujifilm inePix 480
Congratulations on your purchase of an Ikelite Digital Camera
Housing. Ikelite has over 40 years of experience in the underwater
photographic and lighting market. Our products are designed and
built in the USA by Ikelite for both the professional and amateur
photographer.
The clear housing permits instant visual inspection of the camera
and all sealing surfaces as well as complete monitoring of controls
and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for
stability. This housing has been water pressure tested at the
factory. Housing is pressure tested to 200' (60m).
m a n u a l
3
Zoom
Shutter
Release
Lid
Snap
Front View
Mode Dial
Control Pad
Display
Playback
O O p p e e n n i i n n g g t t h h e e H H o o u u s s i i n n g g
1 . Lid Snaps have a L L o o c c k k .
To open, push Lid Snap Lock
forward and lift as shown.
Keep pressure on the Lid
Snap so it does not fly open
quickly.
Some lid snaps have a lot of
spring tension once they go over center, have a firm grip on the
lid snap. Lid Snaps may be opened one at a time.
I I n n s s t t a a l l l l i i n n g g t t h h e e C C a a m m e e r r a a
1 . Remove the back
from the housing.
The mounting tray
for the camera is
O' Ring
secured to the
housing back.
Lid
Position the camera
Hook
on the tray and
secure it with the
mounting bolt which
threads into the
camera's tripod
socket.
C C A A U U T T I I O O N N : :
Some camera tripod socket threads are plastic. The mounting
tray bolt is metal. Do not cross thread or over tighten as you
may damage the camera tripod socket threads.
2. Pull out on each housing control until it stops. This will get the
controls out of the way for installing the camera.
Power
Lid
Snap
Lens
Port
Thumb
Rest
Lanyard
Back View
2
Push Forward
Lid Snap Lock
Lift
Mounting
Tray
Mounting Bolt
CAMERA / MOUNT
4