ENGLISH
iTero
®
Element
Operation Manual
™
CHAPTER 1:
Introduction
About this Operation Manual
The iTero Element system is delivered as a proprietary, PC-based workstation for performing
intra oral scans in the doctor's office. This Operation Manual describes how to boot and shut
down the system, how to correctly handle the Scanning Unit/Wand and cable, and how to
clean the Scanning Unit and replace its sleeves between patients.
Intended Use
iTero Element is an optical impression system (CAD/CAM) used to record the topographical
images of teeth and oral tissue. Data generated from iTero may be used in conjunction with
the production of dental devices (e.g., aligners, braces, appliances, etc.) and accessories.
iTero Element software is used with the iTero Element scanner in capturing 3D digital
impressions of teeth, oral soft tissue and structures, and bite relationship. The software
controls the processing of the data, facilitating the integration of data, and exporting of the
data for CAD/CAM fabrication of dental restorations, Orthodontic devices, abutments, and
accessories. In addition to scan data, various patient and case information can be imported/
exported or used for simulation purposes. Other functions are available for verification and
service of the system and to serve as an order management tool.
Benefits of the iTero Element System
The iTero Element system provides important advantages over existing crown-production
methods, Including powder-free scanning, greater crown-production accuracy, and
immediate feedback during the scanning process.
Refer to our website
http://www.itero.com
to learn how the iTero Service can enhance your
business by Increasing patient satisfaction, improving clinical outcomes, and enhancing office
efficiency.
2
2017 Align Technology, Inc.
Publication 109797
Need help?
Do you have a question about the Element and is the answer not in the manual?