Advertisement
Important
Before the installation, please make sure the installation environment can support at least 3 x weight
(0.31Kg (0.68lb)) of the camera. See data sheet for further information.
1. Paste the installation map on the installation surface.
2. Drill holes in the installation surface according to the installation map.
3. Insert the expansion bolts from the accessories bag to the prepared holes.
4. Attach the device with screws provided in the accessories bag.
5. Connect the cable and then boot up the device.
6. Loosen the adjust knob and adjust the camera to the required surveillance position.
7. Secure the knob of the bracket to fix the camera.
Figure 4-1
Advertisement
