Advertisement
Please refer to the following sheet for more details about each port
.
SN
1
2
3
4
5
6
7
8
9
10
Note:
For reset, press and hold for 8 seconds until the light turns off; For WPS (Wi-Fi Protected Setup) one
quick press.
Please refer to the following sheet for more details about the status of the indicator light.
Indicator light status
Red light on
Green light slowly flashing
Green light quickly flashing
Green light on
Red and green lights alternating
Red light slowly flashing
Red light quickly flashing
Name
Ethernet port (Wireless connection also available)
Reset/WPS button (Wi-Fi Protected Setup)
Digital input/output
Power port
Speaker
Micro SD card slot
Indicator light
Microphone
IR LED
Passive IR （Sense IR ray, trigger alarm）
Sheet 3-1
Sheet 3-2
Device status
Booting
Booting completed, awaiting Wi-Fi config
Wi-Fi smart config in progress, including
WPS, management frame, etc.
Wi-Fi connection succeeded, operating
normally
Device upgrading
Network disconnection
Device failed to boot up; alarm or SD card
does not work
Advertisement
