Wan - SMC Networks EZ Connect SMC8014W-G Install Manual

This feature enables the customer to remotely access the web-based administration screen
with their username and password (default: cusadmin/password). To enable this feature,
check the [Customer Remote Management] checkbox.
Remote Management Access Rule
This option will allow you to limit who can access the remote management web login from the
Internet.
The [Everyone] option allows any Internet user to access the web management login.
The [IP address range] option allows you to set a range of public Internet IP addresses. You can
access the web management login from any IP address in the specified range.
The [Single Address] option allows you to set just 1 public Internet IP address. This is the ONLY
IP address that you access the web management login screen.
A combination of one or more IP address ranges and single addresses can be configured.

WAN

From this section you can configure all the WAN Settings.
To access the WAN configuration page, on the Side Navigation bar, click on [WAN] link.
You can setup the SMC8014W-G to support the Pubic LAN IP as the WAN IP by selecting the [Use
public LAN IP as the WAN IP] checkbox. The Public LAN IP can be configured in the LAN
Settings section.
Click the DHCP WAN IP [Release/Renew] button to release and renew the WAN IP address.
DNS Settings
You can also configure the Gateway to use custom DNS servers.
NOTE: DNS is short for Domain Name System. The DNS IP is a server that that translates
domain names into IP addresses.
Host Name
The Host Name setting is an optional configuration and is used when required by your cable
operator. Contact your cable operator to determine if this setting is required.