Appendix 2: Main New Functions; Version 1.10; Version 1.05; Version 1.04 - OneProd FALCON User Manual

80
6.3 A 2: M
PPENDIX

6.3.1 Version 1.10

Each new function listed below is described in the corresponding chapter. To help you spot the upgrades of this
new version within a chapter, they are written in italics.

New Off-route functions (only for licence with Expert Off-route):
o
Function to create a machine in Off-route: see § 3.7.3
o
Function to create a new measurement on a group of point in Off-route: see § 3.7.4
o
Function to modify a measurement on a group of point in Off-route: see § 3.7.5

Possibility to use the WLS sensor as a single axis sensor: see § 3.5.8

The choice of Wi-Fi channel for the WLS sensor has been change from 1, 5, 9, 13 to 1, 6, 11 to meet
international requirements: see § 2.3.
WARNING: compatible versions

WLS: It is required to update the WLS sensor to firmware version v1.08.
To update the WLS sensor see § 5.6

NEST: It is required to update NEST software to version v2.13
To update see NEST user manual § 2.4

6.3.2 Version 1.05


Improvement of spectrum and time-wave display: see § 3.5.3
o
Cursors are automatically positioned on the closest peak
o
New types of cursors: double, harmonic and side band.
o
Zoom function

For machines with automatic diagnosis, status display of vibration velocity and defect factor parameters.

6.3.3 Version 1.04


New preferences for amplitude conversion used to spectrum and envelop display: see § 2.5

Collector module: for the automatic diagnosis, possibility to modify predefined rotation speed of fixed
rotation speed machines using the stroboscope: see § 1.14.8 and 3.5.4

Balancing module: possibility to measure spectrum without the tacho from the free run screen: see § 4.7
AIN NEW FUNCTIONS
Brand of ACOEM