Advertisement
INSTALLATION
Please follow this quick set-up guide to ensure trouble free installation of your headphones.
Step 1:
Connect the built-in 3.5mm Stereo Audio Cord to the audio output socket of your audio source, e.g. TV,
HiFi, CD, DVD player etc.
*** If your audio source has 2 RCA output sockets (red and white in color), use the 90mm Y-connection
Cord (10) for connection, if necessary.
Step 2:
Connect one end of the AC/DC Adaptor (11) to the DC IN Socket (9) at the rear side of the transmitter,
and the other end to the main electric wall outlet.
Step 3:
The transmitter will be automatically ON when there is audio signal from the audio source (please make
sure that the transmitter is powered on by the AC/DC Adaptor). Then the Power LED Indicator (6) will
glow RED to confirm that the transmitter is ready for operation. Place the transmitter on a dry, cool
place preferably above head level.
*** The transmitter has auto-cut-off function. When there is no audio signal for a prolonged period, the
power of the transmitter will be automatically cut off. You will then hear a little noise from the headset.
Step 4:
Insert 2 pieces AA size batteries into the Battery Compartment (5) at the Left hand side of the
headphones and make sure that they are inserted in the correct way. Then replace the battery cover, and
switch the headphones ON (3).
Step 5:
Switch on your music device (TV. HiFi, CD, DVD etc.) and start your media playing.
Step 6:
Tune the channel Tuning Knob (1) once until the Dual Color LED Indicator (4) of the headphones
changes from RED to GREEN and then you can hear a good quality sound. Adjust the Volume Control
Knob
(2)
to
a
comfortable
sound
level.
4
Advertisement
