•
[Password Settings]
Use this menu to restrict access based on a password.
By default, the password is smcadmin.
Note:
Passwords can contain up to 9 alphanumeric
characters and are case sensitive.
•
[Remote Management]
This feature allows a remote PC to configure, manage,
and monitor the Barricade™ using a standard web browser.
1. Check [Enable].
2. Set the [Allow Access to] policy to one of the 2 options:
[Any IP Address]
You can remotely manage the Barricade™ from
any IP address on the WAN side.
Advanced Setup
25