Table of Contents
Advertisement
TCP/IP
1. Pull down the Apple Menu. Select Control Panels/TCP/IP to view
your TCP/IP information.
2. On the TCP/IP window, make sure "PPP" is selected in the Connect
via: field, and "Using PPP Server" is already selected in the Configure
field.
3. Click the button in the top left corner to close the TCP/IP window.
Modem
1. Pull down the Apple Menu. Select Control Panels/Modem to
configure this device.
2. Set the Connect via field and the Modem field to "ADSL USB
MODEM" on this window.
3. Once you have made these changes, close the Modem Control Panel
and click Save to save your changes.
Remote Access
1. On the control strip located along the bottom of your screen, click
Remote Access/Open Remote Access.
2. Enter the user name and password for the user account you should
have received from your ISP.
3. Key in the Virtual Path Identifier (VPI) and Virtual Channel Identifier
(VCI) (e.g., 0, 33) in Number field.
Note: The VPI and VCI should be provided by your local ISP.
4. Click Connect.
Your computer is now ready to connect to the Internet.
M
C
ACINTOSH
ONFIGURATION
4-13
Advertisement
Table of Contents
