Design Features - BLUE SKY Sat 6D Owner's Manual

Blue Sky Sat 6D
Owners Manual, V1.0
SAT6D Design Features
The Sat 6D monitor is designed and assembled in the USA.
Electronics
The Sat 6D features both XLR Analog inputs and AES/ EBU Digital inputs. The Sat 6D will
automatically switch to Digital if both Analog and Digital inputs are connected. In addition, Digital
pass thru and Digital Stereo L/R selector switches are provided.
The DSP crossover filters are derived using Blue Sky proprietary BOO optimization software. This
includes driver (woofer/tweeter) time alignment.
The Digital circuitry features FR4 6-layer circuit boards, Burr-Brown 192 kHz/24 Bit A/D & 192
kHz/24 D/A, and Cirrus Logic Digital receiver and sample rate convertor. In addition, the Sat 6D
has a "Pure-Digital" mode for 48 kHz and 96 kHz operation, where the native input from the
AES/EBU receiver is sent straight to the DAC, and does not go through the sample rate
convertor.
The Sat 6D has a USB data port for speakers settings, updates and room correction input which
includes a 1/3 octave 31 band digital graphic equalizer, selectable parametric EQ, pink noise
generator, adjustable time delay and gain control.
The Sat 6D has 450-watts of Hypex UcD amplifier power with trickle down N-core technology.
The electronics are designed and assembled in the USA.
Transducers
The Sat 6D has a custom USA designed and built 6 ½" cast frame woofer with a neo radial motor
structure, and a 1" Scan-Speak ring radiator tweeter made in Denmark.
6