ZONGSHEN ZS250GY-3 Service Manual page 34

Drain shock absorber oil
Oil seal
Lower pipe
30
Spring clamp
Shock absorber
pole
Returning spring
[3]Dismantle bolt of front shock absorber and drain
front shock absorber oil.Check whether the oil is
bad.Replace it if bad.
[4]Remove the oil seal and spring clamp of front
shock absorber and check whether the edge of oil
seal is worn.Replace it if necessary.
[5]Dismantle front shock absorber pole and lower
pipe.Check their abrasion.Replace them if worn.
[6]Remove the returning spring of shock absorber
pole and check its abrasion and distortion.Replace
it if distorted.