Advertisement
Quick Links
Advertisement
Related Manuals for Branach FPE-AT 1.2
Summary of Contents for Branach FPE-AT 1.2
- Page 1 FPE-AT User Instructions branach.com s a l e s @ b r a n a c h . c o m...
-
Page 2: Before Use
1. Before Use Ensure that you are fit enough to use a Branach safety step platform ladder. ii. Visually check the platform ladder, is not damaged and is safe to use at the start of each working day. - Page 3 2. Inspecting the Branach Product Before Use Inspect the platform ladder after delivery. ii. Before every use visually check the platform is not damaged and is safe to use. If damaged, do not use. iii. The following items should be...
- Page 4 3. Platform Ladder System Guidelines The maximum total load for the max. platform ladder is 150kg, including tools and equipment ii. System must always be deployed completely before use. iii. Deck must engage to rung. iv. TerrainMaster legs must always be deployed to their widest position allowing for 300mm +/- 15mm step height to ground.
- Page 5 5. Using the Platform Ladder ■ Do not exceed the maximum total load for the platform ladder. Refer to the platform label. ■ Do not overreach; both feet on the deck throughout the task. ■ Always use with TerrainMaster feet in an opened position.
- Page 6 5. Using the Platform Ladder (continued) Do not use the platform ladder on an unfirm or unstable base. Do not exceed the level the TerrainMaster can operate in (15° slope). Use the built-in level bubble or spirit level to ensure the platform ladder steps are level.
- Page 7 FPE-AT Setup Ladder Glossary Stiles Handrail Rungs Brackets Feet Rods and Struts Platform Deck Spacer Platform Hooks Step Plates Platform Rear Step Kickboard Level Bubble...
-
Page 8: Initial Setup
6. Initial Set Up Take platform from vehicle and lay on the ground. 7. TerrainMaster Deployment Slide the leg-lock latch towards the outside of the platform ladder. - Page 9 8. Extend TerrainMaster Extend the TerrainMaster legs to their widest setting. ii. Depress the front and rear leg buttons to extend the leg. iii. Check that the lock buttons re-engage in the extended leg position.
- Page 10 9. Opening Platform Ladder Hold platform ladder upright Place one hand on deck top facing the deck. and other on step cover. Push deck forward and allow Push platform ladder deck platform ladder to move firmly down to engage hooks. 10. Levelling Adjust the TerrainMaster step height to be similar to step distance.
- Page 11 11. Check Incline & Step Height 300mm +/-15mm Use level bubble to Ensure there is a ensure platform ladder 300mm +/-15mm step is at correct angle, from ground to first and level to terrain rung. accordingly. Adjust TerrainMaster wheels to ensure platform ladder level.
- Page 12 12. Position Platform Ladder Before standing platform ladder up check for hazards. ii. Stand platform ladder up as per instructions. iii. Level the platform ladder to the final work position. 13. Rear Safety Rail Operation Always use rear safety rail when working from platform ladder.
- Page 13 14. Closing Platform Ladder Hold rear deck and Pull deck upwards and raise upwards. let platform come back to upright. Pull deck forward allowing sections to close.
-
Page 14: Storage / Care
Repairs and maintenance shall be carried out by a competent person who has been qualified by Branach and shall be in accordance with Branach’s instructions and procedures. Only use Branach recommended components and fasteners. - Page 15 Summary Ensure work area is safe Inspect Level Before Use Use level bubble Stable Enclosed TerrainMaster Rear Safety Rail...
- Page 16 MANUFACTURED BY Branach Manufacturing Pty Ltd a 1/991 Mountain Highway, Boronia, Victoria 3155, Australia w branach.com EUROPEAN SUPPORT Branach Europe AS a Morsoegade 4 DK-6700 Esbjerg, Denmark w branach.com...