Wall Charger; Desktop Chargers; Rapid Charger - Motorola PR400 User Manual

WALL CHARGER

Note: Do not use the wall charger if using
To Charge the Battery:
1 Turn the radio off.
2 Lift the dust cover to expose the audio
accessory connector.
3 Insert the charging adapter into the
accessory connector.
4 Plug the charging adapter into an electrical
outlet.
•
Note:
12
English
lithium-ion (Li-Ion) or nickel-metal hydride
(NiMH) batteries. The wall charger is for
a nickel-cadmium (NiCd) battery only.
The LED on the charging adapter lights
Red while the charger is plugged into an
electrical outlet.
Do not leave the charger connected
to the radio when it is not connected
to the electrical outlet.
5 Unplug the charger from the electrical outlet
and radio after 10 hours.
Note: After the initial charge of 14 to 16
hours, do not charge the battery
more than 10 hours.

DESKTOP CHARGERS

Rapid Charger

1 Turn the radio off.
2 Place the battery, with or without the radio, in
the charger pocket.
• The charger LED indicates the charging
progress.
LED color
No LED Indication Battery inserted incorrectly
or battery not detected.
Single Green Flash Successful charger
power-up.
a
Flashing Red Battery unchargeable or not
making proper contact.
Steady Red Battery is in Rapid charge
mode.
Status