Receive; Monitor; Permanent Monitor - Motorola PR400 User Manual

RECEIVE

1 Turn your radio on.
2 Adjust the radio's volume (see page 19).
3 Switch to the desired channel.
•
4 Listen for voice activity.
•
5 To respond, hold the radio vertically 1 to 2
inches (2.5 to 5cm) from your mouth. Press
the PTT button to talk; release it to listen.

MONITOR

It is important to monitor for traffic before
transmitting to ensure that you do not "talk
over" someone who is already transmitting.
1 Press and hold the preprogrammed Monitor
button to access channel traffic.
•
20
English
Make sure the PTT button is released.
The LED indicator flashes red while your
radio is receiving.
If no activity is present, you will hear "white
noise."
2 Once channel traffic has cleared, proceed
with your call by pressing the PTT button.

Permanent Monitor

1 A long press of the preprogrammed Monitor
button places the radio in Permanent Monitor
mode.
• You hear a good key tone.
2 A short press of the Monitor button cancels
Permanent Monitor mode and returns the
radio to normal operation.