Legend Of Illustrations - Philips Streamium SL50i Instructions For Use Manual

SL50_USA_Booklet.qxd 16-07-2004 12:06 Pagina 5
Legend of illustration (inside flap)
A) Front view
1
Power/standby button
Switches the SL50i off, to standby.
Standby/On LED (indicator in the Power/standby button). See table below.
2
IR receiver
Receives the signals from the remote control.
3
Network link activity LED
See table below.
4
Display
– Indicates the present status of the SL50i.
– Informs you on how to install and operate the SL50i.
– Helps you navigate through the audio content on your PC and the Internet.
B) Rear view
5
Audio L/R output (stereo)
To connect the SL50i to the left and right audio inputs of your audio system.
6
Power
For connecting the SL50i's power adapter.
SL50i LED behavior
LED Status
Standby/On LED Off
Blue (lights)
Red (lights)
Red (blinks)
Network link Blue
activity LED
Blue (blinks slowly)
Blue (blinks fast)
ENGLISH 5
Explanation
No power on SL50i
SL50i in active mode.
SL50i in standby mode.
Thermal shutdown. Let your SL50i
cool down.
Connection with network
available.
- No server found.
- Bad connection
(bandwidth too low)
- Searching for connection.
- No wireless connection available.