Ment - Mercedes-Benz AMG GT S 2016 Operator's Manual

cialist workshop, e.g. an authorized
Mercedes-Benz Center.
! Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Before changing a fuse
Secure the vehicle against rolling away
X
( page 110).
Y
Switch off all electrical consumers.
X
Open the driver's door.
X
The on-board electronics now have status
0. This is the same as the SmartKey having
been removed.
or, if the SmartKey is inserted in the ignition
lock:
Remove the SmartKey from the ignition
X
lock.
All indicator lamps in the instrument cluster
must be off.
The fuse allocation chart is with the wheel-
change tool kit in the cargo compartment.
Fuse box in the front-passenger foot-
well
! Make sure that no moisture can enter the
fuse box when the cover is open.
! The floor panel must be installed properly,
otherwise moisture or dirt could impair the
function of the fuses.
Open the front-passenger door.
X
To open: remove the carpet over the foot-
X
rest.
Loosen screws : on the floor panel using
X
a suitable tool.
Remove the floor panel.
X
To close: install the floor panel again.
X
Screw in and tighten screws :.
X
Put in the carpet and press to secure.
X
Fuse box in the cargo compartment
! Make sure that no moisture can enter the
fuse box when the cover is open.
! When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
Open the tailgate.
X
To open: turn fastener ; on the service
X
flap to the left.
Open service flap :.
X
Fuses
223
Z