Establishing The Connection From The Mobile Phone - Mercedes-Benz AMG GT S 2016 Operator's Manual

If you wish to re-authorize the mobile
i
phone after de-authorizing it, you can
choose another passkey for it.
Establishing the connection from the
mobile phone
®
The Bluetooth device name of COMAND is
"MB Bluetooth".
COMAND: call up the telephone menu.
X
To switch to the menu bar: slide 6 the
X
controller.
Connect Device: turn and press
To select
X
the controller.
The device list is displayed.
Connect via
To select
X
press the controller.
A message is displayed, stating that you
can start the search on your mobile phone.
Mobile phone: start the search for a Blue-
X
®
tooth device (see manufacturer's operat-
ing instructions).
COMAND is displayed with the name "MB
Bluetooth" in the mobile phone's device
list.
Select "MB Bluetooth".
X
A prompt appears in the COMAND display
asking if the mobile phone should be
authorized.
COMAND: select Yes.
X
No
If is selected, the procedure is canceled.
If your mobile phone supports Secure Sim-
ple Pairing, a code is now displayed on both
devices.
The code is the same
COMAND: select Yes.
X
Mobile phone: confirm the code. Depend-
X
ing on the mobile phone used, you may
have to confirm the connection to
COMAND and for the PBAP Bluetooth
profile. The prompt to confirm may take up
to two minutes to be displayed. You may
also save the confirmation on the mobile
phone (see the manufacturer's operating
instructions).
The mobile phone is now authorized and
connected to COMAND. You can now
speak using the hands-free system.
The code is different
COMAND: select No.
X
The process is canceled. Repeat the pro-
cedure.
If your mobile phone does not support Secure
Simple Pairing, you can find more information
about connecting the mobile phone in the
Digital Operator's Manual.
Reconnecting automatically
Phone: turn and
COMAND always searches for the last con-
nected mobile phone.
If no connection can be made to the most
recently connected mobile phone, the system
searches for the mobile phone that was con-
nected before that one.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
Select
X
bar.
The phone menu appears.
To show the menu bar: slide 6 the con-
X
troller.
To select
X
the controller.
The device list is displayed.
To select the desired mobile phone: turn
X
and press the controller.
The selected mobile phone is searched for
and connected if it is within Bluetooth
range and if Bluetooth
®
Only one mobile phone can be connected at
any one time. The currently connected mobile
phone is indicated by the # dot in the device
list.
COMAND operating system
TEL/®/Phone
in the main function
Connect Device: turn and press
® is activated.
177
®
Z