Table of Contents
Advertisement
PC Running Terminal Session
2. Launch a terminal communications program, such as HyperTer-
minal (included with most Windows
are 8 data bits, no parity, and 1 stop bit (8N1). Data rate is deter-
mined by autobaud, but 1115200 bps is the preferred speed.
3. Press the
ENTER
obtain the ready ">" prompt on the screen. Commands may now
be entered from the keyboard.
Command Name
ALARM
AMASK
AUDIO
BOOT
CHAN
CKEY
DATAKEY
DUMP
EMP
FSET
6
LCT 450 Installation/Operation Guide
Figure 6. PC Configuration Setup
key a few times (at half-second intervals) to
Table 1. Command Summary
Function
Alarm Summary
Alarm Mask
Audio Monitor/Orderwire Status
Reboot Radio
Channel commands (RX/TX frequency, RF
power, bandwidth)
Key TX Continuously (Digital Only)
Key on Data Activity
Read Current Unit Profile
Modem TX Audio Pre-Emphasis
Receive or Transmit frequency mini/max
value
Invisible place holder
To DB-9
Management Port
systems). Data parameters
TM
05-4819A01, Rev. 08
Transceiver
Advertisement
Table of Contents
