6. COVERAGE INFORMATION
The detection area changes depending on the mounting height and
angle of the lens of the REX sensor. If the REX sensor is mounted on the
wall above a door with the lens pointing straight, the detection areas
against the wall are not detected and not shown in the illustrations.
Mounting the REX sensor at higher heights,results.
7'5" Ceiling -
Above Single Door
Front View
Bird's-Eye View
Opening New Doors to
Innovation, Quality and Support!
11' 6"
(3.5m)
Side View
2 ft.
(0.6m)
Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
CM-RQE70A PIR 'REQUEST TO EXIT' DETECTOR
in a larger detection area typically. The illustrations show the REX
sensor mounted at 7.5 (2.3m) Feet on a wall with the lens pointing
straight down and at 8 Feet (2.4m) on a ceiling with the lens pointing
straight down.
8' Ceiling - Over the Ceiling
Front View
Bird's-Eye View
(3.6m)
Side View
INSTAL L AT ION INS T RUCT IONS
12'
3 ft.
(0.9m)
File: CM-RQE70A Detector Manual.indd-R1
Rev. Label/Date: 1/07-26-17
Part No: 40-82B203-A
Page 6 of 6