Using The Configuration Utility - SMC Networks EZ Connect SMC2870W User Manual

Using the Configuration Utility

1. Click Start/Programs/SMC2870W/SMC2870W Configuration
Utility.
2. The program will automatically scan for SMC2870W access
points on the network. If you want to subsequently detect all
access points on the network, click the Scan button. From the
list of detected SMC2870Ws, double-click on the IP address
of the unit you wish to configure. A dialogue box will prompt
you for the login password.
Note: Clicking the SMC logo on the screen takes you to the SMC
web site (www.smc.com) for the latest firmware download.
3. Enter the default password: smcadmin and click OK.
U C
SING THE ONFIGURATION
U
TILITY
11