Siemens SITRANS LR260 Quick Start Manual page 18

1.1. Application Type
Options
1.2. Response Rate
Sets the reaction speed of the device to measurement changes in the target range.
Options
Use a setting just faster than the maximum filling or emptying rate (whichever is greater).
1.3. Sensor Units (UNITS)
Selects the units for the Quick Start variables (high and low calibration point, and level,
distance, or space).
M, CM, MM, FT, IN
Options
1.4. Operation
sensor reference point
NO
SERVICE
LEVEL
Operation
SPACE
types
DISTANCE
Default: Distance
Page EN-16 SITRANS LR260 (PROFIBUS PA) – QUICK START MANUAL
STEEL (Default)
CONCRETE
SLOW 0.1 m/minute
MED 1.0 m/minute
FAST 10.0 m/minute
low cal.point
The SITRANS LR260 stops updating measurements. Last valid
measurement is displayed.
Distance to material surface referenced from Low Calibration
Point (process empty level).
Distance to material surface referenced from High Calibration
Point (process full level).
Distance to material surface referenced from Sensor Reference
Point.
high cal.
point
distance
space
level
A5E32114443