Table of Contents
Advertisement
38
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing
with your TV.
How to register the Magic Remote Control
To register automatically, turn the
TV on and press the
When registration is completed, the
completion message appears on the
screen.
If registration fails, turn the TV off and
(Wheel)
back on, then press the
to complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the
SMART
BACK
seconds to reset, then register it by
following How to register the Magic
remote control above.
SMART
2 To re-register the Magic remote
control, press and hold the
button for 5 seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by moving
the remote up and down or left and
right.
»
If the pointer does not work
properly, wait 10 seconds and then try
again.
2 If the pointer disappears, move
the remote control slightly to left
or right. It will then automatically
appear on the screen.
»
If the pointer has not been used
for a certain period of time, it will
disappear.
Wheel (OK).
Wheel (OK)
BACK and
buttons together for 5
BACK
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
1
Shows information about the current
programme and screen.
2
You can select More Menu.
Precautions to Take when Using the
Magic Remote Control
Use the Magic remote control within the maximum
y
communication distance (10 m). Using the remote
control beyond this distance, or with an object
obstructing it, may cause a communication failure.
A communication failure may occur due to nearby
y
devices. Electrical devices such as a microwave oven
or wireless LAN product may cause interference,
as these use the same bandwidth (2.4 GHz) as the
Magic remote control.
The Magic remote control may be damaged or may
y
malfunction if it is dropped or receives a heavy
impact.
Take care not to bump into nearby furniture or other
y
people when using the Magic remote control.
Manufacturer and installer cannot provide service
y
related to human safety as the applicable wireless
device has possibility of electric wave interference.
It is recommended that an Access Point (AP) be
y
located more than 1 m away from the TV. If the AP
is installed closer than 1 m, the Magic remote control
may not perform as expected due to frequency
interference.
Advertisement
Table of Contents
