Important Safety Instructions; Connect The Base Station; Get Started; Configure Your Phone - Philips CD181 Quick Start Manual

Important safety instructions

• Use only the power supply listed in the technical data.
• Do not allow the product to come into contact with liquids.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions. (Refer to the user manual online)
Overview
Loudspeaker
• Find handsets.
• Register additional
handsets.
Speaker
Earpiece
Microphone
1
Connect

Connect the base station

Telephone Power
socket socket
2 1
Telephone
base station
2

Get started

Configure your phone

Charge your phone

QSG_print.indd 2
CD186
CD181
In call
MENU/OK Enter the option
menu
REDIAL/C Enter the redial list
Increase the volume Enter the
Decrease the
volume
Recall key*
*network dependent
End calls
Mute/unmute the
microphone
Turn the speaker
on/off
It displays the connection between
the handset and the base. The more
the bars are shown, the better the
connection is.
It indicates a received call in the call log.
It indicates an outgoing call in the
redial list.
It flashes when there is a new missed
call.
It remains steadily on when browsing
the missed calls in call log.
It flashes when receiving incoming call.
It remains steadily on during a call.
The speaker is on.
The ringer is off.
1 Connect each end of the power adapter to:
Power
•
socket
•
Connect each end of the line cord to:
2
Power
adapter •
•
3
Extra
handset
For multi-handset version only:
charger
3 Connect each end of the power adapter to:
•
•
The batteries are pre-installed in the handset. Pull the battery tape off
1
from the battery door before charging.
When using your phone for the first time, you see a welcome
2
message (country dependent).
After the welcome message, press
3 Please set the country and language if prompted.
Set the date and time.
4
•
Place the handset on the base station to charge the handset. When
the handset is placed correctly on the base station, you hear a docking
sound.
»
Note

Check the battery level

Charge 8 hours
Adjust the speaker volume.
• Play the previous message.
• Replay the current message.
Turn the answering machine on/off.
Skip to next message.
• Delete the currrent messages.
• Delete all messages (press and hold).
Start/stop listening to the recorded messages.
In idle mode
Enter the option
menu
Enter the redial list
phonebook
Enter the call log
Make and receive
calls
Turn handset on/off
(press and hold)
Make and receive
calls
Answering machine: it flashes when
there is a new message. It remains
steadily on when the telephone
answering machine is turned on.
If you are using a voice mailbox from
your provider, this icon flashes when
there is a new message.
It remains steadily on when the voice
messages are already viewed in the
call log.
The icon is not shown when there is
no voice message.
* This is network dependent
It displays when you scroll up/down
a list or increase and decrease the
volume.
There are more digits on the right.
Press
the DC input jack at the bottom of the base station;
the power socket on the wall.
the telephone socket at the bottom of the base station;
the telephone socket on the wall.
the DC input jack at the bottom of the extra handset charger.
the power socket on the wall.
If the time is in 12-hour format, press
.
[PM]
The handset starts charging.
Charge the batteries for 8 hours before first use.
When the handset is off the base station/charger, the bars
indicate the battery level (full, medium and low).
When the handset is on the base station/charger, the bars
flash until charging completes.
The empty battery icon flashes and you hear an alert tone.
The battery is low and needs recharging.
In menu
Confirm selection
Cancel operation
Scroll up
Scroll down
Exit menu/operation
to read.
REDIAL/C
.
MENU/OK
/ key to select [AM]
19/11/2010
or
14:29:00