Advertisement
Assembly
Through the M.2 connector
Installation Guide
Installing and Using an ME906V Module
1.
Connect an antenna connector to the antenna interface of an ME906V.
Note:
Insert the antenna connectors vertically into the antenna interfaces of the ME906V.
Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless
performance of the ME906V be reduced or the ME906V cannot work normally.
Ensure that the antenna is placed normally.
2.
Fasten the the gold finger in the ME906V module to a M.2 connector of a development
board to fix the ME906V module on the development board.
3.
Place a metal fastener between the ME906V module and the development board. Put a
screw through the fixing hole of the ME906V, metal fastener, and fixing hole of the
development board in sequence. Then fasten a nut on the screw.
4.
Insert a UIM card into the UIM card socket in the development board.
4
Advertisement
