Advertisement
Assembly
Through the M.2 connector
Installation Guide
Installing and Using an ME906A Module
1.
Connect an antenna connector to the antenna interface of an ME906A.
Note:
Insert the antenna connectors vertically into the antenna interfaces of the ME906A.
Do not pinch the antenna cable or damage the connectors. Otherwise, the wireless
performance of the ME906A be reduced or the ME906A cannot work normally.
Ensure that the antenna is placed normally.
2.
Fasten the golden finger in the ME906A module to a M.2 connector of a development
board to fix the ME906A module on the development board.
3.
Place a metal fastener between the ME906A module and the development board. Put a
screw through the fixing hole of the ME906A, metal fastener, and fixing hole of the
development board in sequence. Then fasten a nut on the screw.
4.
Insert a UIM card into the UIM card socket in the development board.
4
Advertisement
