Table of Contents
Advertisement
Quick Links
WIRELESS TECHNOLOGY & CRANE INSTRUMENTATION
DIVISIONS
GS025
Radio Anemometer
I
n
s
t
a
l
l
e
r
a
n
d
u
s
e
r
g
u
i
d
e
I
n
s
t
a
l
l
e
r
a
n
d
u
s
e
r
g
u
i
d
e
WARNING
! Carefully read and understand this manual and the
GS320/GS550/GS820 Installer and User's manual before proceeding.
Manual before proceeding.
GM025_ENG_rev.docx
www.loadsystems.com
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LSI GS025
Summary of Contents for LSI GS025
- Page 1 WIRELESS TECHNOLOGY & CRANE INSTRUMENTATION DIVISIONS GS025 Radio Anemometer WARNING ! Carefully read and understand this manual and the GS320/GS550/GS820 Installer and User’s manual before proceeding. Manual before proceeding. GM025_ENG_rev.docx www.loadsystems.com...
- Page 2 IMPORTANT! Refer to the “GS320/GS550/GS820 Display & GS Series Sensors - Installer and User’s Manual” for complete information about installation, operation, maintenance, certification and warranty. GM025_ENG_rev.docx www.loadsystems.com...
- Page 3 BEFORE PROCEEDING Read and understand the following: For your safety and that of the people that come into contact with products, understand the significance of the instructions included in this guide, respect all laws and regulations and comply with applicable standards. Pay particular attention to text boxes and the following words: WARNING! Warning: this denotes an instruction that if not complied with may lead to serious injury or...
- Page 4 Do not weld in proximity to sensor/transmitters. The U-bolt can be used when retrofitting the GS025 on an already installed GS020 rod (previous generation anemometer). Make sure the U-bolt is fully tightened and add the washer and cotter pin at the rod tip.
- Page 5 4. Operation To replace a battery, turn the battery The radio anemometer is fully functional. cover ¼ turn counter clock wise and It does not need to be calibrated or remove, the battery can then be changed adjusted. and reclose the battery cover by turning ¼ Refer to the GS320/GS550/GS820 manual turn clock wise.
- Page 6 IMPORTANT! 8. FCC and IC – Instructions to Changes modifications this the User equipment not expressly approved by This equipment has been tested and the party responsible for compliance found to comply with the limits for a class could void the user’s authority to B digital device, pursuant to part 15 of the operate the equipment.
- Page 7 LSI Contact Information Technical support : Technical Support is available 24 hours a day, 7 days a week from our Houston and Dubai locations. Please direct all technical support questions to either of these locations or contact us via email: techsupport@loadsystems.com...
Need help?
Do you have a question about the GS025 and is the answer not in the manual?
Questions and answers