Replacement Parts & Optional Accessories; Warranty Information; Return For Repair Policy - General UV254SD User Manual

Uva and uvc light meter with datalogging sd card
Table of Contents

Advertisement

If the meter "freezes" (like a computer) and buttons become unresponsive, try resetting the
instrument by pushing the RESET button on its right side (callout 1-11 of Fig. 1) with the
end of a paper clip.
Remove the batteries when storing this product for an extended period of time.
Do not drop or disassemble the instrument or immerse it in water.
REPLACEMENT PARTS & OPTIONAL ACCESSORIES
• Type K and Type J thermocouples
• 9-VDC adapter for 110VAC power supply
• Spare UVA probe
• Spare UVC probe

WARRANTY INFORMATION

General Tools & Instruments' (General's) UV254SD UVA and UVC Light Meter with
Datalogging SD Card is warranted to the original purchaser to be free from defects in
material and workmanship. Subject to certain restrictions, General will repair or replace this
instrument if, after examination, the company determines it to be defective in material or
workmanship for a period of one year.
This warranty does not apply to damages that General determines to be from an attempted
repair by non-authorized personnel or misuse, alterations, normal wear and tear, or
accidental damage. The defective unit must be returned to General Tools & Instruments or
to a General authorized service center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described herein is a
condition of the contract for purchase of this product. In no event shall General be liable for
any incidental, special, consequential or punitive damages, or for any cost, attorneys' fees,
expenses, or losses alleged to be a consequence of any damage due to failure of, or defect
in any product including, but not limited to, any claims for loss of profits.

RETURN FOR REPAIR POLICY

Every effort has been made to provide you with a reliable product of superior quality.
However, in the event your instrument requires repair, please contact our Customer Service
to obtain an RGA (Return Goods Authorization) number before forwarding the unit via
prepaid freight to the attention of our Service Center at this address:
Remember to include a copy of your proof of purchase, your return address, and your
phone number and/or e-mail address.
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
11

Advertisement

Table of Contents
loading

Table of Contents