Bosch GRL Professional 250 HV Original Instructions Manual page 10

OBJ_BUCH-1492-001.book Page 10 Friday, July 1, 2011 12:25 PM
10 | English
Technical Data
Rotational Laser Level
Article number
1)
Working range (radius)
– without laser receiver, approx.
– with laser receiver, approx.
1) 2)
Levelling accuracy
Self-levelling range, typically
Levelling duration, typically
Rotational speed
Aperture angle for line operation
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam Ø at the exit opening,
1)
approx.
Tripod mount (horizontal)
Batteries (alkali-manganese)
Operating life time, approx.
Weight according to
EPTA-Procedure 01/2003
Dimensions (length x width x height)
Degree of protection
1) at 20 °C
2) alongside the axes
Please observe the article number on the type plate of your rotational laser level. The trade names of individual rotational laser levels may vary.
For clear identification of your rotational laser level, see the serial number 16 on the type plate.
Remote control
Article number
3)
Working range
Operating temperature
Storage temperature
Battery
Weight according to
EPTA-Procedure 01/2003
3) The working range can be decreased by unfavourable environmental
conditions (e.g. direct sun irradiation).
Please observe the article number on the type plate of your remote con-
trol. The trade names of individual remote controls may vary.
For clear identification of your remote control, see the serial number 26
on the type plate.
1 619 929 J23 | (1.7.11)
GRL 250 HV
Professional
3 601 K61 60.
30 m
125 m
±0.1 mm/m
±8 % (±5°)
15 s
-1
150/300/600 min
10/25/50°
–10...+50 °C
–20...+70 °C
90 %
2
635 nm, <1 mW
5 mm
5/8"-11
2 x 1.5 V LR20 (D)
60 h
1.8 kg
190 x 180 x 170 mm
IP 54 (dust and splash
water protected)
Assembly
RC 1
Professional
Power Supply of the Rotational Laser Level
3 601 K69 900
Alkali-manganese batteries are recommended for the meas-
30 m
uring tool.
–10 °C...+50 °C
To open the battery compartment 13, turn the locking knob
–20 °C...+70 °C
14 to position
1 x 1.5 V LR06 (AA)
When inserting batteries, pay attention to the correct polarity
according to the representation on the inside of the battery
compartment.
69 g
Always replace all batteries at the same time. Only use batter-
ies from one brand and with the identical capacity.
Shut the battery compartment 13 and turn the locking knob
14 to the
In case the batteries have been inserted incorrectly, the
measuring tool cannot be switched on. Insert the batteries
with correct polarity.
Remove the batteries from the measuring tool when
not using it for extended periods. When storing for ex-
tended periods, the batteries can corrode and discharge
themselves.
GRL 300 HV
Professional
3 601 K61 50.
30 m
150 m
±0.1 mm/m
±8 % (±5°)
15 s
-1
150/300/600 min 150/300/600 min
10/25/50°
–10...+50 °C
–20...+70 °C
90 %
3R
635 nm, <5 mW
5 mm
5/8"-11
2 x 1.5 V LR20 (D) 2 x 1.5 V LR20 (D)
50 h
1.8 kg
190 x 180 x 170 mm 190 x 180 x 170 mm
IP 54 (dust and splash IP 54 (dust and splash
water protected) water protected)
and pull out the battery compartment.
position.
GRL 300 HVG
Professional
3 601 K61 70.
50 m
150 m
±0.1 mm/m
±8 % (±5°)
15 s
-1
10/25/50°
0...+40 °C
–20...+70 °C
90 %
3R
532 nm, <5 mW
5 mm
5/8"-11
30 h
1.8 kg
Bosch Power Tools