Shure SCM800 User Manual page 3

Shure Incorporated
SCM800 Front Panel
MODEL SCM800/E FRONT PANEL FIGURE 1
1. Microphone Channel Gain Controls 1 - 8:
Allows adjustment of microphone gain.
2. Input LED 1 - 8:
Lights red at 6 dB below clipping level.
3. Low-Cut Filter 1 - 8:
Recessed screwdriver adjustment provides adjustable low-frequency rolloff (high pass) to reduce undesirable low-
frequency signals.
4. High-Frequency Shelving Filter 1 - 8:
Recessed screwdriver adjustment provides level boost or cut in mid/high frequency region for compensation of off-
axis lavalier microphones, or for cutting the high-frequency sibilance of vocal microphones.
5. AUX Level Control:
Sets the input level for aux-level equipment connected to the adjacent ¼-inch phone jack INPUT or rearpanel ¼-
inch AUX input.
6. AUX INPUT ¼-inch Phone Jack:
Mixes external auxiliary- or line-level sources, i.e., tape recorders, into output. Signal appears at output of all linked
mixers.
7. MASTER Level Control:
Determines the overall mix level.
8. Output Level Meter:
Nine-segment LED meter indicates peak output signal level. Last LED indicates limiter action.
9. PHONES Control and ¼-inch Phone Jack:
Permits monitoring of mixer output through headphones. PHONES control determines headphones output level.
3/15