Shure SCM800 User Manual page 13

Inputs
Outputs
Total Harmonic Distortion
<0.1%at +18 dBVoutput level, 50 Hz to 20 kHz(through 20 Hz-20 kHz filter); Input 1 and Master at 5, all other con­
trols full counterclockwise)
Hum and Noise
Equivalent Input Noise
Equivalent Input Hum and Noise
Output Hum and Noise
Master full counterclockwise
Master full clockwise
Common Mode Rejection Ratio
>70 dB at 1 kHz
Polarity
Mic/Line, Send inputs to all outputs are non-inverting; Aux input to all outputs is inverting
Overload and Shorting Protection
Shorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals
up to 3 V; Lines and Monitor inputs by signals up to 20 V
Equalization
Low-frequency
High-Frequency
Limiter
Type
Threshold
-125 dBV(150 Ω source; through 400 Hz-20 kHz fil­
ter)
-123 dBV(150 Ω source; through 20 Hz-20 kHz fil­
ter)
through 20 Hz-20 kHz filter; channel controls full
counterclockwise
-90 dBV
-62 dBV
6 dB/octavecut, adjustable corner from 25 to
320 Hz
±6dB/octaveat 5 kHz, ± dBat 10 kHz, shelvingat 5
Peak
Switchable: off, +4, +8, +16 ( dBm at output)
Shure Incorporated
13/15