Introduction; General And Safety Information - Libelium Waspmote Plug & Sense! Series User Manual

Hide thumbs Also See for Waspmote Plug & Sense! Series:
Table of Contents

Advertisement

1. Introduction

The aim of this manual is to introduce the user to Waspmote Plug & Sense! in a practical way.
This document applies to the following Waspmote Plug & Sense! models, approved for FCC and IC:
Model
Waspmote Plug & Sense! 802.15.4
Waspmote Plug & Sense! 900 US
Waspmote Plug & Sense! WiFi
Waspmote Plug & Sense! 4G US
Waspmote Plug & Sense! LoRaWAN US
Waspmote Plug & Sense! Sigfox US

2. General and safety information

Software:
Upload code only using Waspmote IDE. If a different IDE is used, Waspmote can be damaged and can become
unresponsive. This use is not covered under warranty.
Do not unplug any connector while uploading code. Waspmote can become unresponsive. This use is not covered under
warranty.
Do not connect or disconnect any connector while Waspmote is ON. Waspmote can become unstable or unresponsive,
and internal parts can be damaged. This fact is not covered under warranty.
Hardware:
Do not handle black stickers seals on both sides of the enclosure (Warranty stickers). Their integrity is the proof that
Waspmote Plug & Sense! has not been opened. If they have been handled, damaged or broken, the warranty is void.
Do not open Waspmote Plug & Sense! in any case. This will automatically make the warranty void.
Do not handle the four metallic screws of Waspmote Plug & Sense!. They ensure waterproof seal.
Do not submerge Waspmote Plug & Sense! in liquids.
Do not place nodes on places or equipment where it could be exposed to shocks and/or big vibrations.
Do not expose Waspmote Plug & Sense! to temperatures below -10ºC or above 50ºC.
Do not try to extract, screw, break or move Waspmote Plug & Sense! connectors far from necessary usage, waterproof
sealing can be damaged and warranty will be voided. For more information: http://www.libelium.com
Do not connect any sensor not provided by Libelium.
Do not place Waspmote Plug & Sense! where water can reach internal parts of sensors.
FCC ID
XKM-WPS-2400-V1
XKM-WPS-900-V1
XKM-WPS-WIFI-V1
XKM-WPS-4G-V1
XKM-WPS-LORA-V1
XKM-WPS-SFX-V1
-3-
IC
8472A-WPS2400V1
8472A-WPS900V1
8472A-WPSWIFIV1
8472A-WPS4GV1
8472A-WPSLORAV1
8472A-WPSSFXV1

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Waspmote Plug & Sense! Series and is the answer not in the manual?

Table of Contents