Libelium Waspmote Plug & Sense! Series User Manual page 14

Figure : IDE – Waspmote panel of buttons
The next step is to configure the folder where the created programs are going to be saved. In the Waspmote IDE, this folder is
called 'sketchbook' and can be configured by accessing the 'File/Preferences' tab. Clicking on this tab will open a new window
where the location of the sketchbook can be indicated. Once the sketchbook folder path is indicated, the downloaded test
program must be saved in this folder.
Waspmote IDE must be closed so that the changes and the newly saved program in the sketchbook folder are reflected.
-14-