Shark S3901 Series Owner's Manual page 30

fig. 17
AFTER USE AND STORAGE
1 When you have finished using the Handheld Steamer,
reattach it to the mop by first placing the bottom of
the Handheld Steamer into the cradle of the mop
housing. (fig. 17)
2 Then slide the top end of the Handheld Steamer into
the mop housing and snap into place.
NOTE: Make sure all attachments are removed before
reuniting the Handheld Steamer with the Steam
Mop.
3 If you have finished mopping, press the STEAM
CONTROL button until the LED light blinks blue. This
stops the unit from steaming. Unplug the cord from the
outlet and place the mop into the upright position. Let
the unit cool for 2-3 minutes.
30 1.800.798.7398
fig. 18
Remove the cleaning pad by releasing the quick
fasteners and using the lavender loop on the side of
the pocket, avoiding contact with the hot pad or dirt.
(fig. 18)
NOTE: Before storing the appliance for an
extended period of time, emptying the water tank is
recommended.
4 To store the Shark
Pocket Mop hanging up, first remove the head
®
(after it has cooled and the steam has been released)
then hang on a large hook. (fig. 19)
5 Periodically clean the Direct Steam Nozzle and the
Extension Hose Stem with a paper clip.
fig. 19
Lift-Away Pro Steam
® ™