Shark S3901 Series Owner's Manual page 3

12. DO NOT unplug by pulling on power cord.
To unplug, grasp the plug not the power
cord. Do not use extension cords or outlets
with inadequate current carrying capacity.
13. DO NOT put any objects into openings.
Do not use with any opening that is
blocked.
14. DO NOT put hands or feet under the
steam mop. Unit gets very hot.
15. In mop mode use ONLY on flat, horizontal
surfaces. Do not use on walls, counters or
windows.
16. DO NOT use on leather, wax polished
furniture or floors, synthetic fabrics, velvet
or other delicate, steam sensitive materials.
17. DO NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe for
use. If you live in a hard water area, we
recommend using distilled water in your
steam mop.
18. When in use, NEVER turn the appliance
over or on its side. NEVER DIRECT
STEAM TOWARDS PEOPLE,
ANIMALS OR PLANTS.
19. NEVER LEAVE THE STEAM MOP IN
ONE SPOT ON ANY SURFACE FOR
ANY PERIOD OF TIME WHEN THE
CLEANING POCKET IS ATTACHED
AS THIS WILL DAMAGE YOUR
FLOORS.
20. Carefully remove the cleaning pocket
immediately after you have unplugged and
allowed the steam mop to cool.
21. When cleaning the steam mop, unplug the
power cord from the electrical outlet and
SAVE THESE INSTRUCTIONS
clean with a dry or damp cloth. Do not
pour water or use alcohol, benzene or paint
thinner on the unit.
22. Extreme caution should be exercised when
using this appliance to clean stairs.
23. Never use steam mop without the cleaning
pocket attached.
24. Keep your work area well lit.
25. Store steam mop indoors in a cool, dry
place.
26. To avoid circuit overload, do not operate
another appliance on the same socket
(circuit) as the steam cleaner.
27. If an extension cord is absolutely necessary,
an extension cord rated a minimum
of 15 ampere, 14 gage cord should be
used. Cords rated for less amperage may
overheat. Care should be taken to arrange
cord so that it cannot be pulled or tripped
over.
28. Always unplug and allow the steam mop
to cool before removing or changing mop
heads
.
WARNING
is designed to clean hard floor surfaces
that will withstand high heat. Do not use
on unsealed wood or unglazed ceramic
floors. On surfaces that have been treated
with wax or some no wax floors, the sheen
may be removed by the heat and steam
action. It is always recommended to test an
isolated area of the surface to be cleaned
before proceeding. We also recommend
that you check the use and care instructions
from the floor manufacturer.
www.sharkclean.com
:
Your steam mop
3